Download hidemy name vpn 1 60

Author: m | 2025-04-23

Download hidemy name vpn 1.40 for free. Security tools downloads - HideMy.name VPN by inCloak Network Ltd.

hidemy.name VPN APK -Hidemy Name hidemy.name VPN download.

(3 days), 0 for no timeout). range[0-259200] set login-attempt-limit {integer} SSL VPN maximum login attempt times before block (0 - 10, default = 2, 0 = no limit). range[0-4294967295] set login-block-time {integer} Time for which a user is blocked from logging in after too many failed login attempts (0 - 86400 sec, default = 60). range[0-4294967295] set login-timeout {integer} SSLVPN maximum login timeout (10 - 180 sec, default = 30). range[10-180] set dtls-hello-timeout {integer} SSLVPN maximum DTLS hello timeout (10 - 60 sec, default = 10). range[10-60] config tunnel-ip-pools edit {name} # Names of the IPv4 IP Pool firewall objects that define the IP addresses reserved for remote clients. set name {string} Address name. size[64] - datasource(s): firewall.address.name,firewall.addrgrp.name next config tunnel-ipv6-pools edit {name} # Names of the IPv6 IP Pool firewall objects that define the IP addresses reserved for remote clients. set name {string} Address name. size[64] - datasource(s): firewall.address6.name,firewall.addrgrp6.name next set dns-suffix {string} DNS suffix used for SSL-VPN clients. size[253] set dns-server1 {ipv4 address} DNS server 1. set dns-server2 {ipv4 address} DNS server 2. set wins-server1 {ipv4 address} WINS server 1. set wins-server2 {ipv4 address} WINS server 2. set ipv6-dns-server1 {ipv6 address} IPv6 DNS server 1. set ipv6-dns-server2 {ipv6 address} IPv6 DNS server 2. set ipv6-wins-server1 {ipv6 address} IPv6 WINS server 1. set ipv6-wins-server2 {ipv6 address} IPv6 WINS server 2. set route-source-interface {enable | disable} Enable to allow SSL-VPN sessions to bypass routing and bind to the incoming interface. set url-obscuration {enable | disable} Enable to obscure the host name of the URL of the web browser display. set http-compression {enable | disable} Enable to allow HTTP compression over SSL-VPN tunnels. set http-only-cookie {enable | disable} Enable/disable SSL-VPN support for HttpOnly cookies. set deflate-compression-level {integer} Compression level (0~9). range[0-9] set deflate-min-data-size {integer} Minimum amount of data that triggers compression (200 - 65535 bytes). range[200-65535] set port {integer} SSL-VPN access port (1 - 65535). range[1-65535] set port-precedence {enable | disable} Enable means that if SSL-VPN connections are allowed on an interface admin GUI connections are blocked on that interface. set auto-tunnel-static-route {enable | disable} Enable to auto-create static routes for the SSL-VPN tunnel IP addresses. set header-x-forwarded-for {pass | add | remove} Forward the same, add, or remove HTTP header. pass Forward the same HTTP header. add Add the HTTP header. remove Remove the HTTP header. config source-interface edit {name} # SSL VPN source interface of incoming traffic. set name {string} Interface name. size[35] - datasource(s): system.interface.name,system.zone.name next config source-address edit {name} # Source address of incoming traffic. set name {string} Address name. size[64] - datasource(s): firewall.address.name,firewall.addrgrp.name next set source-address-negate {enable | disable} Enable/disable negated source address match. config source-address6 edit {name} # IPv6 source address of incoming traffic. set

Download hidemy name vpn 1.40 for free (Windows)

Name {string} IPv6 address name. size[64] - datasource(s): firewall.address6.name,firewall.addrgrp6.name next set source-address6-negate {enable | disable} Enable/disable negated source IPv6 address match. set default-portal {string} Default SSL VPN portal. size[35] - datasource(s): vpn.ssl.web.portal.name config authentication-rule edit {id} # Authentication rule for SSL VPN. set id {integer} ID (0 - 4294967295). range[0-4294967295] config source-interface edit {name} # SSL VPN source interface of incoming traffic. set name {string} Interface name. size[35] - datasource(s): system.interface.name,system.zone.name next config source-address edit {name} # Source address of incoming traffic. set name {string} Address name. size[64] - datasource(s): firewall.address.name,firewall.addrgrp.name next set source-address-negate {enable | disable} Enable/disable negated source address match. config source-address6 edit {name} # IPv6 source address of incoming traffic. set name {string} IPv6 address name. size[64] - datasource(s): firewall.address6.name,firewall.addrgrp6.name next set source-address6-negate {enable | disable} Enable/disable negated source IPv6 address match. config users edit {name} # User name. set name {string} User name. size[64] - datasource(s): user.local.name next config groups edit {name} # User groups. set name {string} Group name. size[64] - datasource(s): user.group.name next set portal {string} SSL VPN portal. size[35] - datasource(s): vpn.ssl.web.portal.name set realm {string} SSL VPN realm. size[35] - datasource(s): vpn.ssl.web.realm.url-path set client-cert {enable | disable} Enable/disable SSL VPN client certificate restrictive. set cipher {any | high | medium} SSL VPN cipher strength. any Any cipher strength. high High cipher strength (>= 168 bits). medium Medium cipher strength (>= 128 bits). set auth {option} SSL VPN authentication method restriction. any Any local Local radius RADIUS tacacs+ TACACS+ ldap LDAP next set dtls-tunnel {enable | disable} Enable DTLS to prevent eavesdropping, tampering, or message forgery. set check-referer {enable | disable} Enable/disable verification of referer field in HTTP request header. set http-request-header-timeout {integer} SSL-VPN session is disconnected if an HTTP request header is not received within this time (1 - 60 sec, default = 20). range[0-4294967295] set http-request-body-timeout {integer} SSL-VPN session is disconnected if an HTTP request body is not received within this time (1 - 60 sec, default = 20). range[0-4294967295]end Additional Information The following section is for those options that require additional explanation. config authentication-rule A configuration method to create authentication rules for SSL VPN. Edit to create new and specify the rules using the entries available. reqclientcert {enable | disable} Enable or disable (by default) the requirement of a client certificate. When enabled, the SSL VPN daemon will require a client certificate for all SSL VPN users, regardless of policy. sslv3 {enable | disable} Enable or disable (by default) SSLv3. SSLv3 is no longer commonly used, and it is recommended to not use this security measure. tlsv1-0 {enable | disable} Enable or disable (by default) Transport Layer Security (TLS) version 1.0 (TLSv1.0). tlsv1-1 {enable | disable} Enable (by default) or disable

Как использовать VPN hidemy name. - YouTube

--> Free VPN Russia Servers VPN Jantit provide safe free vpn Russia with unlimited bandwidth Tutorial using VPN Free VPN Russia Free PPTP Reset at 23:00 (GMT+7) Location RussiaUnlimited Bandwidth Android 11 or less, Windows, Mikrotik, Linux Simple Setup to Connect Support TCP Only Without Additional Apps Active Up To 7 Days 2828 Accounts per Day--> Check PPTP Servers How to use PPTP? Get Free PPTP Premium VPN Russia No time reset - Create anytime if available - Extend active period anytime - Refund to points anytime- Withuot additional username - Up to 10 devices/VPN - Active up to 360 days - Start from $1 for 30 days PREMIUM V2ray Vless New Active Up To 360 Days Location RussiaUnlimited Bandwidth Android, iOS, Windows Support TLS Support TCP Only Using Additonal Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium V2ray Vless PREMIUM IKEV2 MSCHPv2 Active Up To 360 Days Location RussiaUnlimited Bandwidth Android 12, iOS, Windows, macOS, Linux With Secure Certificate .pem Support TCP and UDP Without Additional Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium IKEV2 MSCHPv2 PREMIUM WireGuard Active Up To 360 Days Location RussiaUnlimited Bandwidth Android, iOS, Windows, macOS, Linux Simple Configuration with QR Code Support TCP and UDP Using Additonal Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium WireGuard PREMIUM V2ray Vmess Active Up To 360 Days Location RussiaUnlimited Bandwidth Android, iOS, Windows Support TLS Support TCP Only Using Additonal Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium V2ray Vmess PREMIUM L2TP SoftEther New Active Up To 360 Days Location RussiaUnlimited Bandwidth Android, iOS, macOS, Windows, Mikrotik Support L2TP with IPsec Support TCP and UDP L2tp Without Additional Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium L2TP SoftEther PREMIUM PPTP Active Up To 360 Days Location RussiaUnlimited Bandwidth Android 11 or less, Windows, Mikrotik, Linux Simple Setup to Connect Support TCP Only Without Additional Apps Start from. Download hidemy name vpn 1.40 for free. Security tools downloads - HideMy.name VPN by inCloak Network Ltd.

hidemy.name VPN APK -Hidemy Name hidemy.name VPN 2.0

Resolution. The peer command may be input multiple times. However, only one default or primary peer entry can exist at a time (for example, 10.2.2.2 default). The default keyword defines the peer as the primary peer. Step 5 idle-time idle-time Example: Router (config-crypto-ezvpn)# idle-time 60 (Optional) Idle time in seconds after which an Easy VPN tunnel is brought down. Idle time=60 through 86400 seconds. Note If idle time is configured, the tunnel for the primary server is not brought down. Configuring Identical Addressing Support Configuring Identical Addressing Support comprises the following tasks: Defining the Easy VPN remote in network-extension mode and enabling nat allow. Assigning the Cisco Easy VPN Remote configuration to the Outside interface. Creating a loopback interface and assigning the Cisco Easy VPN Remote configuration to the Inside interface of the loopback interface. Configuring a one-to-one static NAT translation for each host that needs to be accessible from the EasyVPN server-side network or from other client locations. Configuring dynamic overloaded NAT or PAT using an access list for all the desired VPN traffic. The NAT or PAT traffic is mapped to the Easy VPN inside interface IP address. And, if split-tunneling is required, using the nat aclcommand to enable split-tunneling for the traffic specified by the acl-name or the acl-number argument. The ACL is the same as the ACL used by the NAT or PAT mapping in the preceding bullet item. To configure Identical Addressing Support, perform the following steps on your router. Before You Begin Easy VPN Remote must be configured in network extension mode before you can configure the Identical Addressing Support feature. SUMMARY STEPS 1. enable 2. configure terminal 3. crypto ipsec client ezvpn name 4. mode network-extension 5. nat allow 6. exit 7. interface interface 8. crypto ipsec client ezvpn name outside 9. exit 10. interface interface 11. ip address ip mask 12. crypto ipsec client ezvpn name inside 13. exit 14. ip nat inside source static local-ip global-ip 15. ip nat inside source list {acl-name | acl-number} interface interface overload 16. crypto ipsec client ezvpn name 17. nat acl {acl-name | acl-number} 18.

Ключи HideMy name VPN совершенно бесплатно - YouTube

12:48:17.267: EZVPN(tunnel22): Received authentic disconnect credentialDec 10 12:48:17.275: EZVPN(): Received an HTTP request: disconnectDec 10 12:48:17.275: %CRYPTO-6-EZVPN_CONNECTION_DOWN: (Client) User= Group=tunnel22 Client_public_addr=192.168.0.13 Server_public_addr=192.168.0.1 Assigned_client_addr=10.3.4.5 The following output from the two show commands (show crypto ipsec client ezvpn and show ip auth-proxy config) displays what you might see before a user is connected to a VPN tunnel: Router# show crypto ipsec client ezvpn tunnel22Tunnel name : tunnel22Inside interface list: Ethernet0Outside interface: Ethernet1Current State: CONNECT_REQUIREDLast Event: RESETSave Password: Disallowed! Note the next line. XAuth credentials: HTTP intercepted HTTP return code : 200 IP addr being prompted: 0.0.0.0Current EzVPN Peer: 192.168.0.1Router# show ip auth-proxy configAuthentication global cache time is 60 minutesAuthentication global absolute time is 0 minutesAuthentication Proxy Watch-list is disabledAuthentication Proxy Rule Configuration! Note that the next line is the Easy VPN-defined internal rule. Auth-proxy name ezvpn401*** Applied on Ethernet0 http list not specified inactivity-timer 60 minutes The following output from the two show commands (show crypto ipsec client ezvpn and show ip auth-proxy config) displays what you might see after the user has been connected to the tunnel: Router# show crypto ipsec client ezvpn tunnel22Tunnel name : tunnel22Inside interface list: Ethernet0Outside interface: Ethernet1Current State: IPSEC_ACTIVELast Event: SOCKET_UPAddress: 10.3.4.5Mask: 255.255.255.255Save Password: Disallowed XAuth credentials: HTTP intercepted HTTP return code : 200 IP addr being prompted: 192.168.0.0Current EzVPN Peer: 192.168.0.1Router# show ip auth-proxy configAuthentication global cache time is 60 minutesAuthentication global absolute time is 0 minutesAuthentication Proxy Watch-list is disabledAuth-proxy name ezvpnWeb*** (EzVPN-defined internal rule)http list not specified inactivity-timer 60 minutes Troubleshooting the VPN Connection Troubleshooting a VPN Connection Using the Cisco Easy VPN Remote Feature Troubleshooting the Client Mode of Operation Troubleshooting Remote Management Troubleshooting Dead Peer Detection Troubleshooting a VPN Connection Using the Cisco Easy VPN Remote Feature To troubleshoot a VPN connection created using the Cisco Easy VPN Remote feature, use the following suggested techniques. Be aware that any changes to an active Cisco Easy VPN remote configuration or IP address changes to the involved interfaces, such as adding or removing an inside interface, result in a reset of the Cisco Easy VPN Remote connection. Enable debugging of the Cisco Easy

hidemy name VPN (hideme ru, hidemyname ru): demo

Free VPN Qatar Servers VPN Jantit provide safe free vpn Qatar with unlimited bandwidth Tutorial using VPN Free PPTP Reset at 23:00 (GMT+7) Location QatarUnlimited Bandwidth Android 11 or less, Windows, Mikrotik, Linux Simple Setup to Connect Support TCP Only Without Additional Apps Active Up To 7 Days 2887 Accounts per Day--> Check PPTP Servers How to use PPTP? Get Free PPTP Premium VPN Qatar No time reset - Create anytime if available - Extend active period anytime - Refund to points anytime- Withuot additional username - Up to 10 devices/VPN - Active up to 360 days - Start from $1 for 30 days PREMIUM V2ray Vless New Active Up To 360 Days Location QatarUnlimited Bandwidth Android, iOS, Windows Support TLS Support TCP Only Using Additonal Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium V2ray Vless PREMIUM IKEV2 MSCHPv2 Active Up To 360 Days Location QatarUnlimited Bandwidth Android 12, iOS, Windows, macOS, Linux With Secure Certificate .pem Support TCP and UDP Without Additional Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium IKEV2 MSCHPv2 PREMIUM WireGuard Active Up To 360 Days Location QatarUnlimited Bandwidth Android, iOS, Windows, macOS, Linux Simple Configuration with QR Code Support TCP and UDP Using Additonal Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium WireGuard PREMIUM V2ray Vmess Active Up To 360 Days Location QatarUnlimited Bandwidth Android, iOS, Windows Support TLS Support TCP Only Using Additonal Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium V2ray Vmess PREMIUM L2TP SoftEther New Active Up To 360 Days Location QatarUnlimited Bandwidth Android, iOS, macOS, Windows, Mikrotik Support L2TP with IPsec Support TCP and UDP L2tp Without Additional Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium L2TP SoftEther PREMIUM PPTP Active Up To 360 Days Location QatarUnlimited Bandwidth Android 11 or less, Windows, Mikrotik, Linux Simple Setup to Connect Support TCP Only Without Additional Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium PPTP PREMIUM OpenVPN Active Up To 360 Days Location QatarUnlimited Bandwidth Android, iOS, Windows, macOS, Linux Upgrade OpenVPN V2 New Support TCP and UDP Using Additional Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium OpenVPN PREMIUM SSH Tunnel Active Up To 360 Days Location QatarUnlimited Bandwidth Android, iOS, Windows, macOS, Linux Support UDP CUSTOM port 1-65535 Support WebSocket CDNNew Support SlowDNS Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium SSH Tunnel We are keep growingThank you for all your supportWe are nothing without you googletag.cmd.push(function() { // Ensure the first call to display comes after static ad slot // divs are defined. googletag.display(staticSlot); }); -->

hidemy name VPN (hideme ru, hidemyname ru): demo Хайд - Pro VPN

Easy Button & Menu Maker Cracked + Download.rar More from this folder More from this playlist More from this channel More from this album More from this shelf Express Vpn Pro Apk Portable Free Downloaded Download.rar Andres Berger in 1801FsbcPd2_09 72 KB 1 month ago Andres Berger F460E61C E654 2023 81Ee 4306226Eafcc Activator Activator.rar Andres Berger in 1801FsbcPd2_09 88 KB 1 month ago Andres Berger Everest Ultimate Edition 4 60 2023 Beta 63504Ab1 Crack Download With Activation Code.rar Andres Berger in 1801FsbcPd2_09 64 KB 1 month ago Andres Berger Easeus Data Recovery Wizard Professional 7.5 Cracked.rar Andres Berger in 1801FsbcPd2_09 46 KB 1 month ago Andres Berger Eroico Chronos Crackeado.rar Andres Berger in 1801FsbcPd2_09 73 KB 1 month ago Andres Berger Escape Game - Fort Boyard 2022 Full Installer No Survey.rar Andres Berger in 1801FsbcPd2_09 86 KB 1 month ago Andres Berger View all 4786 files View all 4786 tracks View all 4786 videos View all 4786 images View all 4786 books File Name 11:11 in 100 Mb 1 day ago File Author Description Easy Button & Menu Maker Cracked + Download - download at 4shared. Easy Button & Menu Maker Cracked + Download is hosted at free file sharing service 4shared. Checked by McAfee. No virus detected. Comments Add new comment Send Cancel 500 characters left Continue in app Scan QR code to open file in 4shared app Easy Button & Menu Maker Cracked + D... File QR Code: Easy Button & Menu Maker Cracked + Download.rar Download will. Download hidemy name vpn 1.40 for free. Security tools downloads - HideMy.name VPN by inCloak Network Ltd.

Как обойти защиту 24 часа HideMy name VPN и получить

Slowdns : fast tunneling tool : vpn over dns [ ] ( powered by tunnelguru)===============================*** delete "dnshelp.txt" file from inside /tg/misc folder if you dont want to see it everytime ****help: how to find the best working dns settings for your network:======================= tools ======================================free downloader tool: download file: modes =========================================mode 1> payloadlength = 150 - encoded dns name - txt with encoded response - select keep changing source port.mode 2> payloadlength = 250 - encoded dns name - txt without encoded response - select keep changing source port.mode 3> payloadlength = 250 - encoded dns name - null record - select keep changing source port.================================================================how?======select 1st dns server from the 2nd dropdown .it is your local isp dns server. to get better speed you should find out secondary dns server and append it with existing.[pls see below - how to find local isp secondary dns server]apart from your local isp dns server you can try other popular public dns server if those are working for you like - 8.8.8.8,8.8.4.4============step 1:=============set mode-1 and connect vpn. see if you can download above file using dap ( for 1 minutes )( note download speed )>if mode-1 worksset mode-2 and reconnect vpn. see if you can download above file using dap ( for 1 minutes )( note download speed )>if mode-2 works consider it as the best settings for you.>if mode-2 does not workset mode-3 and connect vpn. see if you can download ( for 1 minutes )( note download speed )>if mode-3 works

Free hidemy ip Download - hidemy ip for Windows - UpdateStar

--> Free VPN Russia Servers VPN Jantit provide safe free vpn Russia with unlimited bandwidth Tutorial using VPN Free VPN Russia Free PPTP Reset at 23:00 (GMT+7) Location RussiaUnlimited Bandwidth Android 11 or less, Windows, Mikrotik, Linux Simple Setup to Connect Support TCP Only Without Additional Apps Active Up To 7 Days 3022 Accounts per Day--> Check PPTP Servers How to use PPTP? Get Free PPTP Premium VPN Russia No time reset - Create anytime if available - Extend active period anytime - Refund to points anytime- Withuot additional username - Up to 10 devices/VPN - Active up to 360 days - Start from $1 for 30 days PREMIUM V2ray Vless New Active Up To 360 Days Location RussiaUnlimited Bandwidth Android, iOS, Windows Support TLS Support TCP Only Using Additonal Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium V2ray Vless PREMIUM IKEV2 MSCHPv2 Active Up To 360 Days Location RussiaUnlimited Bandwidth Android 12, iOS, Windows, macOS, Linux With Secure Certificate .pem Support TCP and UDP Without Additional Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium IKEV2 MSCHPv2 PREMIUM WireGuard Active Up To 360 Days Location RussiaUnlimited Bandwidth Android, iOS, Windows, macOS, Linux Simple Configuration with QR Code Support TCP and UDP Using Additonal Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium WireGuard PREMIUM V2ray Vmess Active Up To 360 Days Location RussiaUnlimited Bandwidth Android, iOS, Windows Support TLS Support TCP Only Using Additonal Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium V2ray Vmess PREMIUM L2TP SoftEther New Active Up To 360 Days Location RussiaUnlimited Bandwidth Android, iOS, macOS, Windows, Mikrotik Support L2TP with IPsec Support TCP and UDP L2tp Without Additional Apps Start from 1 USD for 60 Points for 30 Days Up to 10 Devices/VPN Premium L2TP SoftEther PREMIUM PPTP Active Up To 360 Days Location RussiaUnlimited Bandwidth Android 11 or less, Windows, Mikrotik, Linux Simple Setup to Connect Support TCP Only Without Additional Apps Start from. Download hidemy name vpn 1.40 for free. Security tools downloads - HideMy.name VPN by inCloak Network Ltd. Ключи HideMy name VPN совершенно бесплатно для смены вашего VPN. Сегодня хочу поделиться с вами одним

Hindu Year Names, 60 Years names in Hinduism

From this interface routes out the IPsec VPN tunnel. Creating an address group for the protected network behind this FortiGate causes traffic to this network group to go through the IPsec tunnel. config system interface edit "lan" set vdom "root" set ip 10.10.111.1 255.255.255.0 nextendconfig firewall address edit "local_subnet_1" set subnet 10.10.111.0 255.255.255.0 next edit "local_subnet_2" set subnet 10.10.112.0 255.255.255.0 next end config firewall addrgrp edit "local_network" set member "local_subnet_1" "local_subnet_2" next end Configure the WAN interface. The WAN interface is the interface connected to the ISP. It can work in static mode (as shown in this example), DHCP, or PPPoE mode. The IPsec tunnel is established over the WAN interface. config system interface edit "wan1" set vdom "root" set ip 172.20.120.123 255.255.255.0 nextend Configure the client address pool. You must create a firewall address to assign an IP address to a client from the address pool. config firewall address edit "client_range" set type iprange set comment "VPN client range" set start-ip 10.10.2.1 set end-ip 10.10.2.200 nextend Configure the IPsec phase1-interface. In this example, PSK is used as the authentication method. Signature authentication is also an option. config vpn ipsec phase1-interface edit "for_client" set type dynamic set interface "wan1" set mode aggressive set peertype one set peerid "dialup1" set net-device enable set mode-cfg enable set proposal aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1 set dpd on-idle set xauthtype auto set authusrgrp "vpngroup" set assign-ip-from name set ipv4-name "client_range" set dns-mode auto set ipv4-split-include "local_network" set save-password enable set psksecret your-psk set dpd-retryinterval 60 nextend Configure the IPsec phase2-interface. config vpn ipsec phase2-interface edit "for_client" set phase1name "for_client" set proposal aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305 next end Configure the firewall policy to allow client traffic flow over the IPsec VPN tunnel. config firewall policy edit 1 set name "inbound" set srcintf "for_client" set dstintf "lan" set srcaddr "client_range" set dstaddr "local_network" set action accept set schedule "always" set service "ALL" next end To configure FortiClient: In FortiClient, go to Remote Access and click Add a new connection. Set the VPN to IPsec VPN and the Remote Gateway to the FortiGate IP address. Set the Authentication Method to Pre-Shared Key and enter the key. Expand Advanced Settings > Phase 1 and in the Local ID field, enter dialup1. Configure remaining settings as needed, then click Save. Select the VPN, enter the username and password, then select Connect. Diagnose the connection Run diagnose commands