Fan xpert 4

[Motherboard] Fan Xpert 4 - Introduction Fan Xpert 4 in AI Suite 3 is used to control all the fans that connect to the motherboard, user can adjust rotating speed of fans to customize the need.Starting from the Intel 600 / AMD X670E series, the Fan Xpert functionality will be integrated into Armoury Crate.For motherboards below the Intel 600 / AMD X670E series, please refer to the following instructions to use Fan Xpert:How to use Fan Xpert 4 in AI Suite 3 to control the fan ?1. Open AI Suite 3.2. Click Fan Xpert 4.3. Click Fan tuning to apply the suitable setting on all of fans.4. Tuning proceeding.5. Tuning process is finished when the screen shows Available.6. User can choose default mode: Silent/Standard/Turbo/Full speed from the list. Mode that user choose will apply to all the fans.7. User can also choose one specific fan to set up its rotating speed. Click left/right arrow key to choose the fan.8. Click the diagram to enter the setup.9. Click the Smart mode, and you can move/drag the blue dot to adjust the rotating speed. 10. Under the Smart mode, you can also set up the spin up/spin down time to prevent rotating speed from vast change within a short period of time. Click the Auto-Fan Stop, fan will stop at very low RPMs.11. Click Source, select up to three thermal sources, and the fan speed will automatically change based on the highest temperature.12. Use RPM fix mode, toggle the arrow to set up the rotating speed.13. AI Cooling function is a new feature that applies on ASUS Intel Z490 series motherboard. Al Cooling will decrease the fan rotating speed when system is at stable status.FAQQuestion1: What to do when fan is not working?Step 1: Open Fan Xpert 4 in AI Suite 3, do the fan tuning again.Step 2: Make sure all the cables plug properly.Step 3: Plug another fan to check if the card is working.Step 4: Contact ASUS service center if the steps above are unable to fix the problem. 2: I am unable to set up the rotating speed through Fan Xpert 4.Step 1: Open Fan Xpert 4 in AI Suite 3, and do the fan tuning again.Step 2: Uninstall the AI Suite 3, and install AI Suite 3 again. Refer to the link below for the steps to install and uninstall the AI Suite 3. 3: Which model supports

FAQ [Motherboard] Fan Xpert 4 - Introduction Fan Xpert 4 in AI Suite 3 is used to control all the fans that connect to the motherboard, user can adjust rotating speed of fans to customize the need.Starting from the Intel 600 / AMD X670E series, the Fan Xpert functionality will be integrated into Armoury Crate.For motherboards below the Intel 600 / AMD X670E series, please refer to the following instructions to use Fan Xpert:How to use Fan Xpert 4 in AI Suite 3 to control the fan ?1. Open AI Suite 3.2. Click Fan Xpert 4.3. Click Fan tuning to apply the suitable setting on all of fans.4. Tuning proceeding.5. Tuning process is finished when the screen shows Available.6. User can choose default mode: Silent/Standard/Turbo/Full speed from the list. Mode that user choose will apply to all the fans.7. User can also choose one specific fan to set up its rotating speed. Click left/right arrow key to choose the fan.8. Click the diagram to enter the setup.9. Click the Smart mode, and you can move/drag the blue dot to adjust the rotating speed. 10. Under the Smart mode, you can also set up the spin up/spin down time to prevent rotating speed from vast change within a short period of time. Click the Auto-Fan Stop, fan will stop at very low RPMs.11. Click Source, select up to three thermal sources, and the fan speed will automatically change based on the highest temperature.12. Use RPM fix mode, toggle the arrow to set up the rotating speed.13. AI Cooling function is a new feature that applies on ASUS Intel Z490 series motherboard. Al Cooling will decrease the fan rotating speed when system is at stable status.FAQQuestion1: What to do when fan is not working?Step 1: Open Fan Xpert 4 in AI Suite 3, do the fan tuning again.Step 2: Make sure all the cables plug properly.Step 3: Plug another fan to check if the card is working.Step 4: Contact ASUS service center if the steps above are unable to fix the problem. 2: I am unable to set up the rotating speed through Fan Xpert 4.Step 1: Open Fan Xpert 4 in AI Suite 3, and do the fan tuning again.Step 2: Uninstall the AI Suite 3, and install AI Suite 3 again. Refer to the link below for the steps to install and uninstall the AI Suite 3. 3: Which model supports AI Cooling function?Answer 3: ASUS Intel Z490 series motherboards supports AI Cooling function.Question 4: Is all fan headers on the motherboard support AI Cooling?Answer 4: Fans need to be connected to the following headers for Al Cooling control: CPU_FAN / CPU_OPT / CHA_FAN / M.2_FAN / H_AMP / RAD_FAN,

Board Software Software needs to be installed using Armory Crate and this posed a problem. The software on the USB flash drive refused to install properly while the installer obtained from the product page seemed to have problems installing Fan Xpert 4. In the end we had success by downloading the entire 4 GB Armoury Crate package from this link but even then several sections of the suite refused to install without updates, many of which seemed non-existent or took an age to download and install. With a 1 Gbit download speed we have confidence this was the software or an issue with the ASUS servers and not our Internet connection, but eventually we got there.The primary reasons you'd want to install any of the software are Aura Sync for configuring and synchronizing your GB lighting across the motherboard, any attached LED devices and compatible components and also Fan Xpert 4. Honestly, we'd rather have Fan Xpert 4 available as a standalone software as it does give you one of if not the best Windows-based fan control suites of any manufacturer, with the ability to fine tune fan curves, switch between smart and fixed RPM modes and even pick from alternative temperature inputs for system and pump fans such as thermal or coolant probes, which is extremely useful for situations involving watercooling. At the very least it's useful for configuring your fan speeds within Windows using your preferred stress tests, which is obviously not possible from the EFI BIOS.

Card HAL 1.1.0.20ASUS AURA Motherboard HAL 1.5.0.2ASUS Ambient HAL 4.2.0.0AacVGA 0.0.7.0KingstonDram 1.1.36AURA DRAM Component 1.1.27ENE RGB HAL 1.1.53.0ENE_EHD_M2_HAL 1.0.13.0Patriot Viper DRAM RGB 1.0.9.8Patriot Viper M2 SSD RGB 1.1.0.3Universal Holtek RGB DRAM 1.0.0.7WD_BLACK AN1500 1.0.14.0AIOFanSDK 3.00.21AiSuiteSDK 1.02.12MainSDK 2.01.29MbLedSDK 3.00.34VgaSDK 1.00.21Armoury Crate Plugin - Aio 2.0.18Armoury Crate Plugin - Motherboard 1.2.22Armoury Crate Plugin - ROG FAN XPERT 4 2.0.12Armoury Crate Plugin - Vga 1.0.4ASUS Motherboard 4.03.01ROG FAN XPERT 4 4.02.04VGA 3.01.05Edit:Since this incident (Aura Effects automatically switch to "Rainbow"), about 11 hours have passed and the Aura Effects are still on "SMART", as I set them.Why this happened without anything being changed in Aura Effects is still a mystery to me.Edit 2:The case I described has not occurred again so far.The PC has been running continuously since October 15, 2024 and the set aura effects have been retained. There was no longer an independent switch to "rainbow".The problem may have been solved because I had rebooted the PC once after my post above and the last update "Asus Framework Service" v. 4.2.0.4 was better integrated. I think that this update triggered the problem because the PC was not rebooted afterwards. Intel Core i7 13700K / AiO Fractal Design Lumen S36 v2 RGB / Asus Rog Strix Z790-F Gaming WIFI / Corsair Dominator Platinum DDR5-5600 64GB (4x 16GB) / Asus TUF RTX 5070 ti OC / 4x Samsung 980 pro 1TB / Seasonic Prime GX 850 W Gold / Fractal Design Meshify 2 Lite RGB Black TG Light Tint / Monitor AOC Q27G2S/EU (WQHD)

Faster memory and storage, TUF GAMING B560 series motherboards are the perfect foundation for your next high-core-count battle rig. Power Design Driver and MOSFET Multilayer PCB Power Connector System Stability Controller DrMOS The onboard VRM of TUF GAMING B560 series motherboards utilize 8+1 DrMOS power stages that combine high-side and low-side MOSFETs and drivers into a single package, delivering the power and efficiency that 11th Gen Intel Core processors demand. 6-layer PCB Design Multiple PCB layers shift heat away from critical components, providing more headroom to push CPUs beyond stock speeds. ProCool Connectors Enhanced EATX 8-Pin Connectors ・ Extreme durability ・ Prevent hotspots and connector failure Compared with traditional power inputs, ProCool connectors are built to tight specifications to ensure flush contact with PSU power lines. The resulting lower impedance helps to prevent hotspots and connector failure. TUF Components TUF Chokes Certified military-grade TUF chokes deliver rock-steady power to the CPU, improving system stability. TUF Capacitors Proprietary capacitors provide up to 52% wider temperature tolerance and 2.5X-longer lifespan. Digi+ VRM The integrated Digi+ VRM voltage-regulator module (VRM) is one of the finest in the industry, ensuring ultra-smooth and ultra-clean power delivery to the CPU at all times. Cooler by Design 1. 1.6X--> VRM heatsink A large, high-mass heatsink with extensive surface that covers the VRM and choke areas improves heat dissipation. Thermal pad High-quality thermal pads help transfer heat from the inductor and phase array to the heatsink. 2. Three-->M.2 slots with flexible heatsinks M.2 slot has a dedicated heatsink keep the M.2 SSDs at optimum operating temperature to ensure consistent performance and reliability. Comprehensive Fan Controls TUF GAMING B560 series motherboards feature comprehensive fan controls that can be configured via Fan Xpert 4 utility or via the award-winning ASUS UEFI BIOS. Multiple temperature sources AiO water-cooling set 4-pin PWM/DC fan Smart protection Each header can be set to monitor and react to three user-configurable thermal sensors for workload-based cooling, and all settings can be easily managed by Fan Xpert 4 or via the UEFI. ​ An integrated AiO system enables full control of PWM or DC water pumps, making