Flat tube

Towel Radiators OverviewFor years now, Europeans have found the key to unlocking a bathroom's potential is the comfort provided by the Runtal line of towel radiators. Runtal Towel Radiators offer comfortable radiant heat in the bathroom while at the same time providing the luxury of warm, dry towels and bathrobes.Runtal Electric Towel Radiators are available in two basic designs: flat panel and round tube. The flat-panel design Omnipanel II, offers enhanced heat output and a clean, low profile design available in three sizes. The round-tube series includes 5 models Neptune, Radia, Solea, Versus and Fain, available in a range of finishes and sizes. Towel Radiators may be found in many of the worlds finest hotels, inns and spas. Styles Flat Tube Designs The original Omnipanel Towel Radiator was introduced to North America in 1985 as the flagship of the Runtal Towel Radiator line. The design maximized surface area and thus radiant output. The second generation, the Omnipanel ll, offers an even larger surface area and is available in three heights and a choice of three voltages. The Omnipanel ll also offers two options for operation: The D model has a built-in toggle switch. The H model is supplied without controls on the unit and provides a solution for applications where building codes won't permit unit mounted controls for specific placements, such as above a tub. The Omnipanel II is available in three heights and a choice of three voltages (120, 208 and 240 volts) Round Tube Designs Runtal offers five round tube towel radiators in 120 volts. Each model is offered in either direct wire (Model D) or plug-in version (Model PG) with Runtal’s exclusive soft-touch five setting digital control (off/lo/med/hi/on hi timer for 3 hours). Flat Tube Design Runtal Omnipanel ll A True HeaterThe original Omnipanel Towel Radiator was introduced to America in 1985 as the flagship of the Runtal towel radiator line. The design maximized surface area and thus radiant output. The second generation, the Omnipanel II, offers an even larger surface area and is available in three heights and a choice of three voltages (120, 208 and 240 volts) The Omnipanel II also offers two options for operation: The D model has a built-in lit toggle switch. The H model is supplied without a control on the unit and provides a solution for applications where building codes won’t permit unit mounted controls such as placement above a tub.Owners Manual & Installation Instructions (PDF) Round Tube Designs Runtal Neptune Runtal Radia Runtal Versus Runtal Fain The Runtal Difference DurabilityThese radiators are built to last. One-piece fully welded steel construction and an electrostatically applied advanced powder coat finish ensure years of lasting safe and lasting beauty.VersatilityBy design, Runtal baseboard

This is a multi tool to help install the PTFE tube on the ‘AMS Light Saver Snag Cutter’ by Hexavalent.Warning: When using this tool be sure to keep it flat against a table to avoid cutting yourself. Follow the below steps for use as well as Hexavalent's assembly instruction video: Steps:2. Take your PTFE/Teflon tube and place it through to the slot, closest to the clamp, as shown on the left of the image below and cut through the slot with your blade of choiceYou'll notice a small recess in the tip of the clamp part. pinch the clamp down and bump up the tube to that ledge. Hold down the clamp and cut at the middle 1/4in (6mm) slot. Now you have your small tube to install on the bottom of the AMS Light Saver in a later step.Note: You can even use the Bambu Labs cutter you'll be using on the AMS Light Saver. (original AMS Saver Multi-Tool pictured)2. Choose between the 5-1/2in (140mm) or 5-3/8in (137mm) slots to cut your PTFE tube to length by holding the clamp down.3. Use the clamp of the tool to hold the small cut tube done in step 1 to install into the base of the AMS Light Cutter. Use the flat portion of the tool to push the tube in.4. Next, put the longer cut tube(s) into the clamp portion of the tool and pinch with your fingers. Twist into the top of the cutter to install until the tube is revealed in the indicator hole.Use the clamp to hold the tube above the curved tube guide to assist attaching the triangular filament guide.Special feature!!!Included in the center of each of the cutting slots is a hole to hold a small piece of filament to use to take apart the AMS Light Saver. You can also use a cutting slot to cut that piece of filament, just make sure the filament is above about 5/8in (16mm).And there you have it, a tool to help you install all four of your AMS Light Savers to prevent those pesky tape stoppages. Enjoy!

Box ID：A038 Box Name：Double insert, inner compartment, lock, concealed/flat clasp, upper and lower pair of tube boxes, co Tag：Up and down to the tube box, internal folding for partition, lock, concealed/flat buckle, color box, cardboard corrugated pit cartons, packaging structure design, packaging box structure, packaging de Description：This is a very common box type--- tube type box with reverse tuck. For this box template, there are three tuckstructures in the box template library of Packmage CAD, And dustflaps has two offset ways.Packaging structure design features:1 One board after folding, and glued the two opposite edges, can form one tube body.2 The adhesive position is extended and folded to form an inner support structure, a partition structure.3 Opening on the upper and down sides for sealing end of the reverse tuck.4 Tuck structures: sloved the problem that the box can be self-opened. There are lock structures between tucks and dustflaps.Advantages and usages of this packaging structure:1 Tube type box must be convenient to let products in, and can not be opened easily. It must be protective.2 This packaging box structure usually used in the bottle packaging, for example: cosmetics packaging.Key points of cosmetic packaging design:1 Packaging should be colorful, has good texture with beautiful pictures.2 Cosmetic packaging is usually folding carton, but also has compose type structure.3 The purpose is to make consumers believe that they can be elegant, beautiful and acctractive. Sample Show(0)